EDM alarm systems

EDM ALARM REPAIRS – One of the most popular models ever made in it`s time – DIGI 905 DIGI 908 Digitalarm EDM 905 EDM Digitalarm 908 EDM 4 EDM 8

edm solution alarm system codepad service edm solution 8 alarm keypad replacements

edm solution remote key fob replacements 12 volt 7ah edm alarm battery replacements edm solution 4 button remote key fob repairs replacements services

We service keypad light flashing – Battery light flashing – Fault light flashing – Alarm keypad beeping – Alarm system code reset – Alarm battery replacements – Keypad replacements – Smoke alarms beeping – False alarms repaired

We sell a good range of reconditioned keypads for many older type EDM alarm systems. We do alarm system battery replacements, factory defaults and resets for many types of EDM security systems.

Does your existing alarm system have keyring remote controls? We can connect them to any alarm system!

EDM alarm system reset should be done by a qualified technician. We have many master code chips in stock. If your alarm system is beeping, this is a signal that your alarm system needs to be serviced.

NBN issues to your EDM alarm system

nbn mount waverleyIn most cases the NBN updated rollout to your EDM alarm system will make alarm monitoring communications redundant. A fault light, trouble light/beeping sound occurs when your alarm system attempts to dial either a monitoring back to base, mobile phone or a domestic landline phone number without success. It is likely that the receiving number didn’t connect (comms fail).

Is your Edm alarm system false alarming?

das dl siren false alarmingThere is nothing more annoying than an Alarm system with false alarms and a beeping keypad. Waking up in the early hours by the alarm sirens for no apparent reason is very troublesome.

Environmental and various system faults may cause a beeping keypad and trouble light to occur. Our experienced service technicians can analyze and repair the fault of your alarm system.

Our alarm service technicians can repair many different makes and models.

User Operating manuals for EDM – SOLUTION:

Our Alarm Maintenance can connect remote controls to current old and existing alarms

EDM 4 PLUS 4 QUICK REFERENCE USER INSTRUCTION MANUAL

EDM SOLUTION 8 SHORT QUICK REFERENCE MANUAL

EDM SOLUTION 6 PLUS 6  QUICK REFERENCE USER MANUAL

  • How to arm and disarm the EDM security system
  • How to reset your EDM Date/Time settings
  • How to test your EDM alarm system
  • How to isolate EDM alarms zones
  • How to change EDM user codes

SHORT LIST USER MANUAL TO ARM DISARM EDM ALARM PANELS

ARMING ALARM SYSTEM

Enter USER CODE the # (Away) eg. 1 2 3 4 # (Away)

AWAY light or indicator comes ON

DISARMING ALARM SYSTEM

Enter USER CODE then # (Away) eg. 1 2 3 4 # (Away)

Away light comes OFF

MEMORY EVENT HISTORY

Enter MASTER CODE then 3 then # (Away) eg. 1 2 3 4 3 # (Away)

Event is displayed – most recent displayed 1st to the least recent

BYPASSING ALARM SENSORS

Enter * twice, USER CODE then ZONE then * (Stay)

Repeat for other zones to isolate, then # to exit feature eg to isolate ZONE 2: ** 1 2 3 4 02 * # (Away)

TESTING THE ALARM SYSTEM

TEST ALARM MONITORING TO YOUR MOBILE PHONE – Press 9 on keypad until you hear two beeps

SIREN – Press 1 and hold until you hear two beeps – siren will sound for 2 seconds

BELL – Press 2 until you hear two beeps – internal siren will sound for 2 seconds

STROBE LIGHT – Press 3 until you hear three beeps –

This will turn strobe ON. Repeat, press 3 until you hear three beeps to turn strobe off.

RESETTING TIME AND DATE

Enter your MASTER CODE then 6 then # (Away) eg. 1 2 3 4 6 # (Away)

Next enter the current – Day (DD) Month (MM) Year (YY) Hour (HH) Minute (MM)

(example) 01th Aug 2015 at 14:25 hrs = 0 1 0 8 1 5 1 4 2 5 # (Away)

EDM KEYPAD BEEPING

BEEPING SOUND – If plug pack is unplugged or the mains POWER is disconnected the keypad will SOUND once every minute. To silence, press 5 and hold until you hear two beeps. Press # to exit this feature.

 

Alarms Melbourne Security Licence 71826620S